Guide on Updating the LE-270A (Version 1.03)

LINEEYE CO., LTD has released the latest PC software and firmware of LE-270A (ver1.03). The latest version of LE-270A corrects some bugs on the firmware.
If you have been using the ex-version, please update to the latest version.

[ Update Information ]

<Bug correction>

• Correct the bug that measured data (max. 1K frame) in the buffer is not saved into a SD card during power failure when monitoring in Logger mode.

  Former version (V1.02 or before) may not able to save measured data into a SD card during power failure when monitoring in Logger mode. The latest version improves the file processing into a SD card during power failure and closes the file properly.

<Other improvement>

• Support LIN baud rate from 400bps to 26000bps.
• Add "Calculate" button to set the appropriate value of frame end time in LIN.
• Wait for about 10 seconds (RUN LED slow blinking) before turning off the power of analyzer in AUTO Run/ Stop function.

[Complete version history]

[ How to update the latest fimware ]

Please download the latest firmware and PC software (LE-LINK27) from our Website.
Please make sure you update both firmware and PC software.
Refer to the manual of LE-270A for more details.

[ Contact ]

Email: Contact Us