Specifications (PC-connectable Communicarions Protocol Analyzer LE-150P)

Specifications (PC-connectable Communicarions Protocol Analyzer LE-150P)
Measurement interface		Standard: RS-232C1/422/4852 Option: 2.5/3.3/5 V TTL*3
Supporting protocol		Asynchronous (Async), Async PPP Data (5, 6, 7, and 8 bits) + parity (none, odd, even, mark, space, and MP4) + stop (1, 1.5 and 2 bits)5
Baud rate		50 bps to 250 kbps*6
Data code		ASCII, EBCDIC, JIS7, JIS8, Baudot, Transcode, IPARS, EBCD, EBCDIK, and HEX
Bit transmission order		LSB first or MSB first
Bit polarity		Normal or inverted
Record storage	Capacity	Up to 1,000 files in 1 MB, 2 MB, 4 MB or 8 MB can be specified on HDD of the PC.
Record storage	Mode	Fixed buffer mode (measurement finished with specified capacity used) or ring buffer mode (endless recording leaving the latest data of the specified capacity) selectable.
Error check		Parity, framing, break, LRC, CRC-16, CRC-ITU-T, CRC-6, and CRC-12
Idle time		OFF (no recording) or recording in resolution of 100 ms, 10 ms or 1 ms.
Time stamp		OFF (no recording) or selectable "Day/Hr/Min", "Hr/Min/Sec" and "Min/Sec/10 ms."
Line status		Records RS, CS, ER, DR, CD and CI signal logic along with data.
Trigger	Condition	Specified types of communication errors, communications data string up to 8 characters (don’t care and bit mask available), logic of interface signal line, match timer counter value, idle time more than the specified duration, external signal
Trigger	Action	Stops measurement (offset can be set), controls timer/counter, enables and disables trigger conditions, sends the specified data string
External trigger I/O terminal		External device and trigger signal I/O (Input: Trigger condition; Output: Active output when conditions satisfied)*8
Search function		Specified types of communication errors, communications data string up to 8 characters (don’t care and bit mask available), idle time more than the specified duration, time stamp at the specified time (don’t care can be specified), trigger matching data
Simulation function		Possible to transmit 16 types of transmission data strings registered in advance (total of 16 K data) with one click. DTE/DCE pin specifications selectable, presets line/data timing, inserts parity error
Save		Saving raw data in text or CSV format.
LED indicator		RDY (Ready), RUN (Measuring), SD (Sending data), RD (Receiving data)
PC connection interface		USB 1.1/2.0 (at full speed)
Power supply		USB bus power operation (1.5 W max.)
Temperature range		In operation: 0 to 40°C, In storage: -20 to 60°C;
Humidity range		In operation: 30 to 80%RH, In storage: 5 to 90%RH (No condensation)
Dimensions and weight		90 (W) x 150 (D) x 28 (H) mm, approx. 200 g
System requirements	PC	PC/AT compatible (DOS/V) CPU: Pentium3 1GHz min. with RAM capacity of 256 MB or more recommended. HDD: 5 MB + capacity for communications log recording USB port
System requirements	OS	Windows® 98SE / Me / 2000 / XP / Vista / 7
Accessories		Analyzer Analysis software CD USB cable (1.8 m) DSUB 25-pin monitor cable

*1: Monitor cable LE-259M1 (option) is required if the target RS-232C port is DSUB 9-pin.
*2: No connection cable for RS-422/485 is provided. Prepare a cable suitable to the measurement side, or use terminal block adapter LE-5TB (option).
*3: TTL monitor probe pod OP-5M (option) is required.
*4: The parity can be specified as a multi-processor bit.
*5: The number of stop bits can be set to 1.5 only in monitor mode. Transmission data at the time of simulation cannot be set to 1.5 bits.
*6: Arbitrary speed setting to 4 effective digits is possible.
*7: No data recording is possible while in RS-422/485 communication.
*8: No connection cable for the external trigger terminal is provided. Prepare a harness fitting for the terminal connector (HIROSE ELECTRIC’s DF1E-3P-2.5DS), or use three-wire probe cable LE-3LP (option).