PC link software for CAN/LIN
(For OP-SB7GX)


Specifications of LE-PC7GX
Applicable Analyzer LE-3500R/LE-2500R/LE-3500/LE-2500 with optional expansion kit, OP-SB7GX
LE-7200/LE-3200/LE-2200 with optional expansion kit, OP-SB7F/OP-SB7FX
Connection port USB, Serial(RS-232C), LAN (LAN-Serial converter, SI-60F)
Key Emulation Display the screen image and keys of analyzer on the PC. Save the screen image in bitmap.
Communication Conditions It is possible to set the analyzer conditions. (communication conditions, triggers, simulation data)
Remote Monitor Function*4 Start/stop the measurement. Display the measured data on the PC. Record data (Can be specified up to 2,000 files in the unit of 1/2/4/8M byte.)
Data Display*3 Time stamp (difference of time stamp), CAN/LIN frame display (SynchBreak*1, SynchField*1, ID, TYPE, DLC, DATA0-7, Checksum*1, STATUS), External signal level*2, Trigger
Watch Data Display Display the specific ID frame (max.16 kinds) at real time.
Search Display matched data or count data
Conditions Trigger: Trigger matching frame
Error: Break, Sync, Parity, Checksum, Framing
Data: Specified ID (don't care(*) can be set) Character string (up to 8 character, don’ t care (*), bit mask can be set)
Time stamp: specific time stamp (don't care(*) can be set)
External level:
Text Conversion Convert measured file into text or CSV format.
Memory Card It is possible to read the measured file in the memory card
Environment PC PC/ATconversion(DOS/V), HDD: 3MB+free space for saving the measurement data. 
OS Windows® XP/Vista/7/8
Composition CD(Software), Instruction manual, Warranty
*1: Display only LIN frame.
*2: Display in digital/analog by using OP-SB7GX. Display only in digital by using OP-SB7FX.
*3: Cannot display at real time.
*4: The communication speed which analyzer can monitor data without any data loss at remote monitor function is different. Refer to the following table.
When monitoring CAN standard data frame (8byte) with 1ms interval continuously.
USB connection Max. 1Mbps
Serial port direct
Max. 17.86Kbps Even the speed of the target device is 1Mbps, it can measure data without any data loss, if it communicates data with 10ms interval.
Via SI-60
Max. 40Kbps