Gbit Ethernet LAN expansion kit
(supports PoE mesurement)
(For LE-8200A/8200)


Specifications of OP-SB89G
Applicable Analyzer LE-8200A/LE-8200
Interface Port A, B: 10BASE-T/100BASE-TX/1000BASE-T
Monitor function Measures and logs the LAN frames which flow between the port A and B.
Frame size: 60byte-9Kbyte,
Time stamp (13 digits. Resolution: 1ms, 100µs, 10µs, 1µs, or 40ns can be specified)
Auto stop by external signal trigger
Recording Frame Max. 48,000 - 1,048,000 frames (equivalent to100Mbyte)
Display Translatable protocol: IPv4, ARP, ICMP, TCP, UDP, DHCP
A software to convert to pcap file is attached.
Filter function Monitoring of specified frames (disregarding the other frames)
Auto save function Automatically saves the captured data into external memory.
Retrieval function You can retrieve specified frames and display/count it.
Statistic function This function keeps statistics of 2 kinds of frame counters by specified interval (1-240 minute), and display it in a graph.
It is possible to display all the frame counter values in real-time
PoE function Measurement and continuous logging of the power consumption / Voltage / Current / Power (Alternative A/B, polarity), OK/NG statement between devices of PoE (IEEE802.3af) / PoE+ (IEEE802.3at).
Interval: 1ms-1s. Max recording time: 4 million. Voltage: 0-60V (±1% F.S.). Current: 0-600mA (±2% F.S.).
PG function Up to 16 types of arbitrary packets can be sent from port A for the specified number of times or continuously
Frame gap can be specified for each packet (wire-rate output is also available)
PING function It sends a PING command from port A for about 30,000 times and displays the response count and response time.
You can specify the command transmission interval (10ms, 50ms, 100ms, 500ms, 1s), timeout time (10ms, 50ms, 100ms, 500ms, 1s, 5s, 10s), and payload length (0 to 900).
Port Blink function It is possible to make the link LED of the connected HUB blink periodically
Accessories Interface expansion board, Line state sheet E, LAN cable, Utility CD