SI-60F

●Connects 10Base-T/100Base-TX by auto-detection.
●Supports multi protocols such as TCP/IP, UDP/IP, ARP, etc.
●Displays the RS-232C lines by LEDs, which are useful to check communications at the first stage.
●Can use in the workplace environments between -10 to 50 degree Celsius.
●Solid, card-case sized, and metal enclosure.
●Supports installation of 35mm DIN rail.
●Environment-friendly design. Use lead-free solder. Non-use of chromium screw etc.

SI-60F: Japanese model (100V Input AC adapter)
SI-60F-E: World wide model (Wide Input AC adapter )

Option

Item	Name	Remarks
DIN Plate	SI-DIN70	Uses for installing 35mm DIN rail.
DIN Plate	SI-DIN30S	Uses for installing vertically to 35mm DIN rail.
Magnet	SI-MG70	Two magnets to attach the SI/LANIO-series on the wall. Screw two magnets on the bottom of device.
Wall bracket	SI-WM1	Metal fitting to attach the device on the wall. Screw the meal fitting board on the bottom of device.
AUX cable	LE2-8V	To connect SI-60F with the AUX port of LINEEYE analzyers
AC adapter	VFN-650B	Input: AC100V, 50/60Hz Output: DC6V, 500mA Plug: Center minus, 5.5mm (external), 2.1mm (internal) Standard: PSE Noise resistance * Same as attached one.
AC adapter for SI-series	GF12-US0618	Input: AC100-240V, 50/60Hz Output: DC6V, 1.8A Plug: Center minus, 5.5mm (external), 2.1mm (internal) Standard: PSE/UL/CUL/FCC/CE *Small, low cost AC adapter
Wide Input AC adapter	6A-181WP09	Input: AC100-240V, 50/60Hz Output: DC9V, 2A Plug: Center plus, 5.5mm (external), 2.1mm (internal) Standard: PSE/UL/CUL/FCC/GS/CE/CCC * Same as AC adapter packaged with world wide model
Power plug cable	SIH-2PG	DC plug 2.1mm (5.5mm outside)-Y terminal (1.8m) For the external DC power supply connection to the DC-IN terminal. The cable clamp attachment is included.