What is the pin connection like when monitoring RS-485 by using LE-series?
Connect RS-422/485 port as follows:
Transmission line : 2-pin (TxD-A)/14-pin (TxD-B)
Reception line : 3-pin (RxD-A)/16-pin (RxD-B)
GD : 7-pin (the signal ground of the target device)
Transmission line : 2-pin (TxD-A)/14-pin (TxD-B)
Reception line : 3-pin (RxD-A)/16-pin (RxD-B)
GD : 7-pin (the signal ground of the target device)