Purchasing a 10GbE/1GbE analyzer and get the analyzing option
for RS-232C/422/485/530 and TTL for 50% OFF!!

By purchasing a new LE-8600X / LE-8600XR or LE-8500X / LE-8500XR now, you can purchase the optional board for RS-232/422/485/530 and TTL (SB-R2TS1) for 50% OFF from the normal pricing. These models are available from LINEEYE distributors.

	LE-8600X (No Wi-Fi connection function) LE-8600XR (with Wi-Fi connection function) 1kg, handheld design. Measurement can be performed by itself without a PC Two measurement ports which support SFP/SFP+ modules Real-time monitor recording of 10Gbit packets Output test packets for network load test Adds time stamps which can be synchronization by GNSS (PPS) signal Automatically records communication logs on large-capacity internal SSD or to external storage via USB3.0 Save data in PcapNG files that can be analyzed by Wireshark PC link with LAN, USB, or Wi-Fi (XR only) connection
	LE-8500X (No Wi-Fi connection function) LE-8500XR (with Wi-Fi connection function) Simultaneous measurement of two Ethernet packet lines and one PoE power Output test packets at wire-rate from 2 channels at the same time PoE / PoE + / PoE ++ judgment and long-time power recording, logging to CSV Adds time stamps which can be synchronization by GNSS (PPS) signal Automatically records communication logs into large-capacity external storage via USB3.0 1kg, handheld design. Measurement can be performed by itself without a PC Saves data in PcapNG files that can be analyzed by Wireshark PC link with LAN, USB, or Wi-Fi (XR only) connection
	LE-8500X-SE (No Wi-Fi connection function) LE-8500XR-SE (with Wi-Fi connection function) Compatible with 100BASE-T1, 10BASE-T1L, 10BASE-T1S measurements Real-time monitor recording of packets SPoE/PoDL measurement function and PSE diagnosis (pseudo PD) function Can output test packets for network load tests 10BASE-T1S multidrop PLCA diagnostic function Timestamp that can be synchronized with GNSS (PPS) signals Save pcap file that can be analyzed with Wireshark PC link with LAN, USB, or Wi-Fi (XR only) connection
	SB-R2TS1 Supports RS-232C, RS-530, RS-422 / RS-485, and TTL just by one unit. Supports real-time monitoring and communication analysis of high-speed communication up to 20Mbps Supports legacy interfaces such as V.35, X.20 / 21, RS-449. Program simulation function that enables flexible communication tests Bit error rate test function for transmission quality analysis Reproduces and outputs a timing waveform data acquired by the logic analyzer function Time stamp that allows time synchronization by GNSS (PPS) signal