Guide on Updating the Firmware of LE-200PS, LE-150PS (version 1.05)

LINEEYE CO., LTD has released the latest PC software and firmware of LE-200PS/ LE-150PS(ver1.05). The latest version corrects some bugs on the firmware. If you have been using the ex-version, please update to the latest version.

[ Update Information ]

• Correct the bug that measured data (max. 8K byte) in the buffer is not saved into a SD card during power failure when monitoring in Logger mode.
  Former version may not able to save measured data into a SD card during power failure when monitoring in Logger mode. The latest version improves the file processing into a SD card during power failure and closes the file properly.

• Correct the bug of trigger "send" command, pausing because of response time setting.
  The trigger "send" command should not be executed when the measurement stops.

[Complete version history]

[ How to update the latest firmware ]

Please download the latest PC software (LE-LINK20) from our Website. After updating it, check the version from Menu -> [tool] -> [firmware check]. A note for updating firmware will be displayed. Read it carefully and start updating.
If you already have the latest firmware, the note for updating firmware will not be appeared.
Refer to the manual for more detail.

[ Contact ]

Email: Contact Us