Jun. 22, 2013

Guide on Updating the Firmware of LE-3500/2500 (version 1.08)

Thank you for using LINEEYE products.
LINEEYE has released the latest firmware (ver1.07) of LE-3500/2500.
If you have been using the ex-version, please update to the latest version.

[ Update Information ]

  1. Add BREAK transmission function.
    Able to transmit BREAK signal (space status for about 12bit)in the ASYNC simulation function.
    MANUAL mode   :  Transmit BREAK by pressing [END/X] key
    PROGRAM mode   :   Add SEND BRK command. (LE-3500 only)
  2. Add file size of 16M byte in the Auto save function.
    < Configuration of Auto save function >
    Able to save data in file size of 16M byte in the Auto save function and use the CF card efficiently.
  3. Change the initial value of time stamp.
    Change the initial value of time stamp from OFF(no record) to HMS(hr/min/sec). Time stamp information is necessary to display ASYNC/Modbus frame in different lines which are updated in previous update.

[Complete version history]

[ How to update the latest firmware ]

Please download the latest firmware from our Website.

Software for transferring firmware "LE8FIRM" is also available from our Website.

Refer to the"LE8FIRM.TXT" document in the utility CD and transfer the latest firmware to the analyzer.

[ Contact ]

Email: Contact Us