GUIDE
LINEEYE Co., LTD. is going to releas a DC signal source for simulation of analog signal "LE-930R" in June, 2019.
<LE-930R> |
Easy-to-use analog signal source with high accracy by use with PC or without PC is needed. LINEEYE Co., LTD. has developed a DC signal source LE-930R which can output analog signal (voltage or current). When using with PC you can set it (measurement range, measurement target) and control of signal output by attached PC application. By writting setting file on a SD card and insert it to LE-930R, it can output voltage/current following the pattern descrived in the setting file without PC. As the loop power source for current output supports an external power source, by using LE-930R instead of a sensor you can use it for the distributor testing.
Analog output | 1 channel | |
---|---|---|
Output range | Voltage: ±10V, ±100mV Current: 0 to 20mA (external voltage source is supported.) |
|
Resolution | Voltage range: 16bit (setting accuracy) Current range: 15bit |
|
Accuracy | Voltage range: ±(0.05% of Setting + 2mV) Current range for 0-20mA: ±(0.05% of Setting + 2uA) |
|
Acceptable load | Coltage range: More than 1KΩȏ Current range: Less than 500Ωȉ | |
Communication interface | Mini USB port, Wi-Fi(IEEE 802.11 b/g/n) | |
SDHC card | Max. 32GB | |
Power | USB bus power/External DC source | |
Temperature/Humidity | In operation: -10 to 50℃, In storage: -20 to 60℃ Humidity: 10 to 90%RH (No condensation) |
|
Dimension and Weight | 86mmx93mmx30mm, about 150g | |
Installation option | DIN rail mounting*1 | |
Accesories | Utility CD, mini USB cable (1.8m), manual, warranty card |
Email: Contact Us