LINEEYE LE-590TX Version History

HOME >> Support > Update > LE-590TX Version History

Update

[ LE590-TAP v1.1b081 ]

Minor bug fix in the chart function
Fixed a bug that it is linked with Auto MDIX regardless of the MDIX setting of Media Config

[ LE590-SG v2.0b003 ]

Changed the GUI, such as making the start operation can be easily done from the toolbar.
Fixed a bug that NDP (Neighbor Discovery Protocol) function of IPv6 was not working properly.
Fixed a rare bug that it could not be linked when changing the setting of MDIX setting of Media Config.
Fixed a bug that the speed and duplex may be linked with values different from those selected in the Auto setting of Media Config.

[ LE590-TAP v1.1b072 ]

When auto-saving in the instant mode, the last packet after the capture stop is also auto-saved to the file.
Added "capture packet number" setting in the block mode in the capture filter.
Fixed a bug that the packet selection check box of the chart (polyline) is sometimes grayed out on Windows 7.
Fixed a bug that the chart's Start Time, End Time pull-down menus were blank
Fixed a bug that Rate control in port settings did not work

[ LE590-SG v1.1b028 ]

Fixed DUT clock measurement available.
Removed VLAN setting of router NAT.
Removed capture buffer setting.
Fixed a rare bug that the submit button would get locked.
Removed "Master/Slave Mode" setting in media settings.
Fixed a bug that too many message popups appear in media settings.
Corrected the table item name "Rx Frame/Gap Control" of the multi-stream generation to "Tx Frame/Gap Control".
Fixed a bug that some data is different when reading and importing Pcap files for a multi-stream generation.
Fixed a bug that "Export to Excel" in the counter window did not export.
Changed initial counter cell width to 150.
Fixed a bug that pressing "Apply" after changing "Settings" of the Universal Stream Counter may cause a forced termination.
Fixed a bug that Universal Stream Counter would have different values when "Saved" and opened in Excel.
Fixed the message when it is "Clear" at the universal stream counter.
Fixed BERT the default packet length value to 1512.
Fixed a bug that Rx Rate was blank when "saved" in BERT and opened in Excel.
Fixed a bug that BERT cannot stop when the link to be measured is broken during "continuous transmission".
Fixed the default value of ARP Reply.
Changed X-TAG default offset value to 49 in the port settings.