Firmware Version History for OP-SB7FX

Able to set the appropriate "FRAME TIME" (frame end time) automatically according to the LIN speed.
Change the display of receiving illegal frames to be same as OP-SB87.
Change the initial value of INTERVAL (schedule transmission cycle) for LIN simulation to 200ms.
Correct a minor bug of loading configuration files on a CF card.
Correct the bug that trigger switch, which is a selection of trigger actions, does not be applied.
Correct the bug of improper position of sweep data after configuration of LIN schedule.
Correct the bug that inner pull-up resistor is not turned ON/OFF correctly.
Correct a minor bug of outputting text.

Correct "Automatic Check Sum" to be calculated with P1/P0 Parity when ENHANCE.
Add a display of difference of time stamp.
(Press [ZOOM/CODE] key after stopping the measurement.)

Correct a minor bug of displaying time between cursors at Logic Analyzer function.
Correct the bug that 1ms is displayed as 10ms.
Improve the timing signals of LCD display.