LE-PC300F Version history

Version 1.06 June 28, 2006

Additional Function and Improvement

Added a function that can set the frame end detection time of ASYNC and Burst communications within the range of 1 to 100 ms. (*1)
Added the display process dedicated for each measurement mode of DELAY, TREND and BERT.
Added the display process for the measurement result data of DELA, BERT, FLOW (SEND MODE) and POLLING.
Added the result display for the real time measurement of DELA, BERT, FLOW (SEND MODE) and POLLING. (*1)
Added "REPEAT" mode to the BERT setting. (*1)
Added a function that can save the measured data of BERT on REPEAT mode converting into CSV. (*1)
Improved the function to display timer/counter data when measuring. (*1)
Improved in order to make the background color etc. of the timer/counter screen legible.
Added the register value display of PROGRAM to timer/counter screen in PROGRAM mode.
In the postscript mode of a full stop, added the error display in case there are already data files of the number of the maximum blocks.
In the postscript mode, added the error display in case there is file name number more than 99999000.
Added the function to select the system language from Japanese or English when using on Japanese OS.
Added the process to close only the data file without closing the data window.
Improved to open the data window by ENTER key after selecting the setting on the remote setting screen.
Added an operation for selecting the setting by double-clicking from the summary display of the trigger setting or the data table.
Added the progress display of file reading to the status bar when reading multiple files.
Changed the input position of the hexadecimal data and transmission table into intelligible and blinking underline display.
Improved to open the connection setting dialog box when operating to open the main window in case the connection setting is incorrect.

(*1): Supports only if the firmware of the analyzer connected is V1.08 or later.

Bug Fixes

Fixed a bug of which the block size setting returns to 1 M byte of an initial value each time when starting.
Fixed a minor bug of which neither [HOME] nor the [END] key is effective on the translation display screen.
Fixed a bug of which the translation display process might delay extremely.
Fixed a bug that will become an error when specifying the same folder as measurement data for the place to save screen data and using it.
Fixed a bug of which the process after reading the data file of which the number of data is 0 is incorrect.
Fixed a bug of which the update process is suspended if ALT+F4 key is input while updating firmware.
Fixed a minor bug of the communication condition setting process for SI-60 when using SI-60 (LAN-Serial converter).
Fixed a bug of which invalid waveform monitor data might be processed in DELAY mode.
Fixed a minor bug about the display of the remote setting automatically prepared when starting at the first time.

[ detail ]

Version 1.05 September, 6, 2005

Fixed a bug that a frame with much data cannot be translated by the text conversion function.
Fixed a bug of BCC/FCS insert process at the time of ASYNC (PPP) on the editor of the transmission data table.
Fixed a bug of BCC/FCS insert operation at the time of IrDA SIR on the editor of the transmission data table.
Fixed a minor bug of connection via LAN network.
Improved a function to memorize a setting of a search condition until an application end without initializing at every measurement.
In the synchronism function of the setting, added a mode which performs only an automatic transmission to transmit the setting data to your analyzer.
Added a function to update the firmware of your analyzer.
Some English messages at the time of English mode were made easier.

[ detail ]

Version 1.04 July, 6, 2005

Fixed a bug about "End data" in the "FILL function" of the transmission data table.
Fixed a minor bug at the time of the operation of F10 key.
Fixed a minor bug in DLL version warning display.
Changed the function not to open a file if its analyzing condition is different from the one on the first file when you open plural files.
Improved the function to display Timer/Counter information if it is in the end file when you open plural files.
Improved the function to display the wave monitor data if it is in the end file when you open plural files.
Changed the specification to save a file in a range of the maximum block count on the remote monitor.
Fixed a bug that the trial version may not be installed correctly. (This happens mainly on Windows® 98 and Me.)

Version 1.03 June, 30, 2005

Fixed a bug that some parts of the change of the setting are not reflected when you close the analyzer setting window by "×" instead of "Close" button.
Fixed a minor bug regarding the keyboard operation on the key emulation window.
Fixed a bug that you cannot perform the keyboard operation when the mouse cursor is on the menu bar.
Fixed a display bug of the text conversion function on the non-English version OS.
Fixed a minor bug regarding the setting operation of the text conversion function.
Added the setting synchronization (automatic analyzer setting transmission and reception) function.
Improved the function to acquire the wave monitor data automatically, and display in a high speed.
Changed the function to acquire the result of analyzing automatically after the remote monitor stopped.
Added Timer/Counter display tub on the data display window.
Changed the function to restore the setting value of the last analyzer setting window.
Fixed a display bug when the END and PAGE DOWN key input on the editor screen of the transmission data table.
Added a change button of the hexadecimal input and the character input on the editor of the transmission data table.
Added the automatic calculation and the insert function of BCC/FCS on the editor of the transmission data table.
Added the fill function and the all clear function of the number of the specified data on the editor of the transmission data table.
Added "Refresh" button on the text conversion function.
Changed the function to set an initial value of the folder setting automatically on the text conversion function.
Changed the function to change the file extension to ".csv" when you select the CSV format on the text conversion transaction.
Deleted the generic LAN-serial converter not included in the operation guarantee from the connection method selection list.
Added shortcut key operations on several operations.

Version 1.02 June, 7, 2005

Fixed a bug that the begin condition and the end condition of DELAY are not set correctly.
Fixed a bug that pattern setting of BERT may not be set correctly.
Fixed a minor bug regarding the communication transaction of the key emulation relation.

Version 1.01 June, 1, 2005

Fixed a bug that the character search includes the flag of HDLC cannot be performed correctly.
Fixed a bug that the time stamp includes "*" (don't care) cannot be performed correctly.
Fixed a bug that contents of the transmission data table are not reflected on the capture and the save of the setting.
Fixed a display bug regarding the data delete on the editor screen of the transmission data table.
Fixed a display bug after the display suspension of the remote monitor.

Version 1.00 May, 30, 2005

Release version First public version

<Trial version/Update version released> After version 1.03 since June, 30, 2005

Trial version

The trial version which has the following restriction of function released

Has 7 days limit after first boot.
Cannot save the setting data and the measurement data of your analyzer.
Has 10 minutes limit for remote monitoring after start of measurement.

Serial number "TRIAL0" is input automatically when you install.

Note: Windows® Installer 2.0 or newer versions have to be installed beforehand.
Please get Windows® Installer 2.0 or newer versions from a support page on Microsoft web site when one of them has not been installed yet.

Updating version

Can update when LE-PC300F or released version of LE-PC300 has been installed beforehand.

Updating from LE-PC300F
Input the "LE-PC300F released version serial number" as the serial number required when you update.
Updating from LE-PC300
Serial number "D042B0095E89DC85" is input as an initial value automatically when you install.