OBD2-DB25C2-1

Overview

This is the cable to monitor CAN communication by connecting to OBD2 connector. This cable can power the analyzer through OBD2 connector by using DC plug cable and it does not need any other external power source. You can log CAN data by using the analzyer and this cable in the car.
The OBD2 connector of the cable is Type B which you can use for both a Type A connector of 12V battery power and Type B connector of 24V battery power.

< Whole Image >

< Connection example >

< OBD2 connector (female) on the side of car >

You can monitor 1 channel of CAN communication which is compliant with SAE J1962 pin assignment.

< Use in a car >

Note: Please fix the devices to prevent miss driving when you use in a car.

■Outline View

■Connecting diagram

■Specifications

Length	OBD2 cable 1m / Power Cable 380mm
Connector	1. side: DSUB25pin (female) #4-40 inch secrew 2. side: OBD II Type B connector 16 pin (male)
OBD2 Cable	Connector attached cable, shielded
Power Cable	DC jack attached cable DC jack: Center plus, 5.5mm (external), 2.1mm (internal)
Applicable analyzer	LE-270GR / LE-270AR / LE-270A

Note: The OBD2 connector of the cable is Type B which you can use for both a Type A connector of 12V battery power and Type B connector of 24V battery power.

Note: Please fix the devices to prevent miss driving when you use in a car.

Note: You can contact us for the customization of length and target signal.