PRODUCT
Small mobile printer
SM4-31W
Overview
It is a to be lightweight, robust, waterproof and dustproof (equivalent to IP54) battery-powered printer. You can print communication data, statistical analysis information, measurement conditions, etc. measured with a compatible LineEye communication analyzer on site without using a PC.
*This product is manufactured by Sanei Electric Co., Ltd.
■Features
- High-speed printing up to 80mm/sec
- Small and lightweight design for easy portability
- Equipped with an OLED (organic EL) display with excellent visibility, enabling clear display even in bright environments
- Compatible with USB, Bluetooth, and wireless LAN (with WLAN Direct) connections. Wireless LAN communication is possible directly from the printer without a router.
- Robust, waterproof, and dustproof design (drop resistance of 1.5m or more, waterproof and dustproof equivalent to IP54)*1
- Supports printing of JIS level 1 to 4 characters.
- Measurement data from LINEEYE communication analyzers can be printed continuously*2
*1 Test value according to manufacturer's regulations.
*2 Only USB and wireless LAN are supported for printing
■Specification
| ModelModel | SM4-31W |
|---|---|
| Supported Analyzer*1 | LE-8600X(R)/ LE-8500X(R)/ LE-8500X(R)-RT/ LE-3500XR/ LE-2500XR |
| Printing method | Thermal line dot method |
| Print pitch | 203dpi (8dot/mm) |
| Print width | Up to 576dot / 72mm |
| Paper | Paper Width: 80mm Paper thickness: Receipt 59-85um Outer diameter: Maximum φ50mm |
| Max print speed | Up to 80mm/s (value with DC7.4V, print rate 12.5% or less, room temperature, recommended paper) |
| Interfaces | USB, Bluetooth BLE, wireless LAN |
| Character type | One byte character: ASCII, international characters, katakana, PC-437/850 and other 18 countries Double bytes character: JIS X0213-2008, Levels 1-4, Non-Kanji User characters: external characters, download fonts |
| Character composition (W×H) | One byte character 16 dots: 9 x 16 dots One byte character 24 dots: 12 x 24 dots Double bytes character 16 dots: 16 x 16 dots Double bytes character 24 dots: 24 x 24 dots |
| Sensors | Out-of-paper detection sensor, thermistor, cover-open sensor |
| Various buffers | Input buffer: 8K bytes Print buffer: 32K bytes User memory: 33K bytes |
| Barcode | UPC-A/E, JAN13/8, CODE39/93, ITF, CODABAR, CODE128 GS1 Databar Omni-directional, Truncated, Limited, Stacked, Stacked Omni-directional |
| 2D code | QR, MicroQR, MaxiCode, MicroPDF417, PDF417, DataMatrix |
| Software | Android SDKs, iOS SDKs, Windows Drivers & SDKs |
| EMC standards | VCCI/CE/FCC Class-B |
| Print life | Pulse resistance: 100 million pulses or more Abrasion resistance: 50Km or more * with DC7.4V, print rate 12.5% or less, room temperature, recommended paper |
| Power supply | Battery pack: rated DC 7.4V, 2000mAh AC adapter for charging: DC9.0V, 1.3A |
| Current Consumption | During idle: 300uA or less (when power is off) Standby: 100mA or less (when the display is off) Paper feeding: 500mA or less During printing: 1.5A or less (maximum peak approx. 3.5A or less) |
| Battery Life | 100m or more Approximate values for battery fully charged, continuous printing at 12.5% printing rate, and less than 100 charging cycles. |
| System operating environment | Temperature: -10°C to +50°C (printing guarantee +5°C to +35°C) 0°C to +40°C when charging Humidity: 20% RH to 80% RH (no condensation. However, 80% RH assumes up to 35°C) |
| Save environment | Temperature: -20°C to +60°C Humidity: 10%RH to 90%RH (non-condensing) |
| Mass | Approx. 370g (with battery installed, no roll paper, no belt clip) |
| External dimensions (W×D×H) (excluding protrusions) | 106 x 121.5 x 60.5 mm (with elastomer) |
| Drop impact resistance | 1.5m※2 |
| Water resistant | Equivalent to IP54*2 |
| Standard | CE, FCC |
| Others | Equipped with wireless LAN as standard Power can be turned on/off automatically |
| Accessories | AC adapter (for charging only), USB (C to A) cable, 1 roll of paper (sample), belt hook, battery pack, instruction manual, warranty card |
*1: LE-8600X(R)/ LE-8500X(R)/ LE-8500X(R)-RT firmware V 1.06 or later, LE-3500XR/ LE-2500XR firmware V 1.05 or later supports continuous printing of measurement data via USB or wireless LAN.
*2: Test value according to manufacturer's regulations.