Guide on Updating the Firmware of LE-2500/3500 (version 1.06)

LINEEYE has released the latest firmware (ver1.06) of LE-3500/2500.
If you have been using the ex-version, please update to the latest version.

Support bigger capacity of CF card.
Support 16G byte CF card (CF-16GX) for LE-3500 and 8G byte CF card (CF-8GX) for LE-2500.

Capacity of CF card
	Previous version	New version
LE-3500	Max 8G byte CF-2GX, CF-8GX	Max 16G byte CF-2GX, CF-8GX, CF-16GX
LE-2500	Max 2G byte CF-2GX	Max 8G byte CF-2GX, CF-8GX

Improve the AR clock extracted circuit for HDLC NRZI format.
Improve Simulation function of SIP protocol (LE-3500 only)
Improve SPI simulation of LE-3500 equipped with OP-SB5GL (OP-SB5G) TTL/I²C/SPI expansion set.
- Able to transmit continuously without SS signal rising or falling if setting "0" on Clock phase.
- Change SDI to "1" at the timing of SCK etc after sending the last bit in Slave simulation.

Please download the latest firmware from our Website.

Software for transferring firmware "LE8FIRM" is also available from our Website.

Refer to the"LE8FIRM.TXT" document in the utility CD and transfer the latest firmware to the analyzer.

To have bigger CF card capacity on OP-SB7GX, please update OP-SB7GX firmware to Version 1.06.