●2-way operation of PC-connected protocol analyzer / logger
●2-channel measurement by combination of CAN/CAN FD and LIN
●Remote measurement of multiple analyzers with one PC
●The measurement log in SD card can be checked from PC via Wi-Fi without stopping measurement
●Records 4 external signals of ±16V or 0V to 32V along with communication data
●Test transmission function to send repeatedly pre-registered communication data strings by selecting it on PC
●GPS positioning compatible with QZSS SLAS (Sub-meter Level Positioning Augmentation Service)
●Communication transceiver and analog measurement circuit are electrically isolated from the measurement recording circuit section connected to a PC
●Optimal backup control during momentary power outage protects files from power outages while accessing the SD card
●Robust design to withstand use in harsh field environments

The LE-270GF is a small and lightweight CAN/CAN-FD/LIN communication data logger with a built-in acceleration sensor, capable of GPS positioning compatible with QZSS SLAS (Sub-meter Level Positioning Augmentation Service), and capable of measuring analog voltages up to 32V. It can be used in two modes: logger mode, which allows continuous recording of measurement logs to a large-capacity SD card by itself, and remote mode, which connects to a personal computer (hereinafter referred to as PC) via Wi-Fi or USB as a CAN/CAN-FD/LIN communication analyzer and displays measurement data of communication, positioning, acceleration, and analog voltage in real-time on the PC. In remote mode, multiple analyzers can be remotely measured from one PC and continuously recorded on the PC's HDD, etc., and you can compare and analyze multiple communication lines. It also has a test transmission function that allows pre-registered test communication data to be selected on the PC and repeatedly transmitted, which is useful when developing communication devices. It is resistant to momentary power outages and can be used where there are water droplets. As it consumes low power it can be widely used for installation in test vehicles and integration into inspection lines.