PRODUCT
PC link software for CAN(FD)/CXPI/LIN
(For OP-SB7XC/OP-SB7XL) NEW

LE-PC7XCL

Specification
Specifications of LE-PC7XCL
Applicable Analyzer LE-3500XR/LE-2500XR with optional expansion kit OP-SB7XC/OP-SB7XL
Connection port USB(High-speed), Wi-Fi
No. of coonnectable analyzer It can connecting to one analyzer and remotely control it.
Key Emulation On a PC you can remotely operate the analzyer as if you control it directly. Saving the bitmap format of the display screen is available.
Communication Conditions It is possible to set the analyzer conditions. (communication conditions, triggers, simulation data)
Remote Monitor Function*2 Start/stop the measurement. Display and record the measured data on the PC.
Recording capacity: Max 1024 files in 1M to 32Mbyte file unit
Data Display*3 Time stamp (difference of time stamp), CAN(FD)/CXPI/LIN frame display (BreakField*1, SynchField*1, ID, TYPE, DLC, DATA, Checksum*1 /CRC, Error status), External signal level, Trigger point
Watch Data Display Display the specific ID frame (max.16 kinds) at real time.
Logic Analyzer Waveform Display Enlarge and reduce waveform display, measure time between cursors, rearrange signals
J1939 Display Translated display of some parameters defined in SAE J1939-71 (Rev.2003-12)
Search Display or count the matched data
Conditions Trigger matching point, Various errors, Specified ID (don't care can be set), Character string (up to 8 characters, don't care and bit mask can be set), CAN remote frame, Specified time stamp (range can be specified), External signal logic
Text Conversion Convert measured file into text or CSV format.
Memory Card It can measure log file saved in the storage device (SD card/USB flash memory) by the analyzer.
Environment Windows® 8.1/10
Composition CD(Software), Instruction manual, Warranty
*1: Display only LIN frame.
*2: Depending on the communication status between the PC and analyzer, the measurement data may be missed on the remote monitor.
*3: Cannot display at real time.