PRODUCT
PC link software
(For LE-8500X-RT/8500XR-RT)
(For LE-8500X-RT/8500XR-RT)
LE-PC800X
Specification
| Applicable Analyzer | LE-8500X-RT, LE-8500XR-RT, SB-R2TS1 | |
|---|---|---|
| Connection with analyzer | Connection by LAN, Wi-Fi(Only the model with Wi-Fi connection), or USB | |
| How much analyzers | Can connect with multiple analyzers and control them remotely (PC capability determines how much can be connected.) | |
| Key emulation function | It emulates the display and control part of the analyzer on PC and you can control as if you are controlling it directly. | |
| Measurement condition setting | The measurement conditions of the connected analyzer is automatically read and the settings can be changed. | |
| Remote monitor function | Start and stop of measurement, display of measured data on PC, and continuous recording | |
| Recording mode | Fixed buffer mode (stops measurement at specified volume) or Ring buffer mode (continue recording leaving latest data not overwritten) can be selected. | |
| File size | 1M/2M/4M/8M/16M/32M/64M/128M byte | |
| Max. file number | 2048 | |
| File switch | When the data reaches the specified file size. Even if the specified size is not recorded, it is possible to specify switching to the next data file at every specified time | |
| Display mode | Raw data display, Frame/protocol translation display, Timer/counter display, and Logic analyzer waveform display. | |
| Raw data display | Display of communication data with idle time, time stamp, and line status. Character code (10 types) and character type (small, medium, and big) are switchable. |
|
| Frame display | Line feed display for each communication frame of ASYNC, SYNC, SPI, and I2C | |
| Protocol translation display | Translation display of ASYNC-PPP, Modbus, PROFIBUS, SDLC, X.25, and LAPD protocols. | |
| Logic analyzer waveform display | Zoom in and out of waveform display, time measurement between the cursors,, sorting of signals. | |
| Display area | Window size is changeable. | |
| Character code | ASCII, EBCDIK, JIS7, JIS8, EBCD, Transcode, IPARS, Baudot, HEX, HEX (HEX with error code) | |
| Search function | Cueing or count of the data which corresponds with the search condition | |
| Search condition | Specified character line (Max.8 characters, Don’t care and bit mask are available), Idle time more than the specified value, Specified time stamp (Don’t care is available), Error (Parity, Framing, BCC, Brake/Abort, Individual designation of Short frame is available), Data corresponds with the trigger | |
| Text/CSV convert function | Collective conversion of indicated number of measurement log files into text format or CSV format is available. | |
| Display capture function | The display of the analyzer by key emulation can be saved as bit map file. | |
| Storage device | It can read the log file (which is captured by the analyzer) in in a storage device such as SD card and USB flash memory. | |
| System requirement | Windows® 11/10/8.1*1 | |
| Accessories | CD-ROM, Manual, User registration card | |
*1: Use with Windows® 8.1 is not supported.