PRODUCT
OBD2-DSUB9 Cable
OBD2-DB9-09B
Overview
This is a conversion cable that can take out the signal of the OBD2 connector of the car to the DSUB 9-pin connector. The OBD2 connector is Type B and can be used with type A with a battery voltage of 12V and type B vehicles with a battery voltage of 24V. It can be used to monitor and test the CAN interface of the OBD2 connector using a Lineeye CAN analyzer with a DSUB 9-pin CAN measurement port.
< Connection example >
■Appearance
■Connecting diagram
■Specifications
| Length | 0.9m |
|---|---|
| Connector | 1. side: DSUB9pin (female) 2. side: OBD II Type B connector 16 pin (male) |
| OBD2 Cable | Connector attached cable, shielded. AWG26 |
| Applicable analyzer | LE-170SA / OP-SB87FD / OP-SB87 / OP-SB7XC / OP-SB7XL / OP-SB7GX |
| Standard | RoHS |