Correspondence table (PDF)

32GB SDHC card SD-32GX Class10

16GB SDHC card SD-16GX Class10

8GB SDHC card SD-8GX Class10

Monitor Cable for DSUB 25-Pin "LE-25M1"

[ details ]

Branch cable for measuring communication lines over general DSUB 25pin. * Same as a cable packaged with LE-8200A / 8200 / 3500 / 2500 / 1500 / 7200 / 3200 / 2200 / 1200 and LE-1100-E.

Monitor Cable for DSUB 9-Pin "LE-259M1"

[ details ]

Branch cable for measuring RS-232C over DSUB 9pin of PC, etc.

DSUB25-9 adapter "LE-259AD2"

[ details ]

Converts DSUB25 pin of RS-232C to DSUB9 pin. DB25 pin (female) - DB9 pin (female)

5-wire TTL prove "LE-5LS"

[ details ]

Prove cable for TTL/external I/O port of LE-3500R/LE-2500R/LE-1500R As same as the one attached to LE-3500R / LE-2500R.

10 pin external I/O cable "LE-10ES1"

[ details ]

10-pin cable for TTL measurement port

Terminal Block for RS-530 "LE-530TB"

[ details ]

A screw terminal adapter to convert RS-530 port into terminals. It enables you to connect RS-422/485 lines easily.

Terminal Block for DSUB 25-Pin "LE-25TB"

[ details ]

Converts analyzer's RS-422/485 port (DSUB 25pin specifications) to terminal block specifications

Terminal Block for RS-422/485 "LE-5TB"

[ details ]

Converts RS-422/485 signals to the terminal block specification.

AUX Cable for DSUB 9-Pin "LE2-8V"

[ details ]

Cable for connecting AUX (RS-232C) port of measurement unit with PC(DSUB 9pin DTE specifications). * Same as a cable packaged with LE-8200A / 8200 / 3500 / 2500 / 1500 / 7200 / 3200 / 2200 / 1200.

X.21 Monitor Cable (Shield Type) "LE-25Y15"

[ details ]

Branch cable (Shield Type) for measuring X.20/21 over DSUB 15pin with Shield Type.

V.35 Monitor Cable "LE-25M34"

[ details ]

Branch cable for measuring V.35 over M34pin

RS-449 Monitor Cable (Shield Type) "LE-25Y37"

[ details ]

Branch cable (Shield Type) for measuring RS-449 over DSUB 37pin with Shield Type.

RS-530 Cable "LE-25S530"

[ details ]

Shield cable for RS-530 interface.

OBD2-DSUB25 Cable "OBD2-DB25C2-1"

[ details ]

Monitors CAN communication by connecting it to OBD2 connector. OBD2 connector power supply is available. Applicable: LE-270GR / LE-270AR / LE-270A

OBD2-DSUB25 Cable "OBD2-DB25R2-1"

[ details ]

Monitors CAN communication by connecting it to OBD2 connector. OBD2 connector power supply is available. Applicable: LE-270GR / LE-270AR

OBD2-DSUB9 Cable "OBD2-DB9-09B"

Monitors CAN communication by connecting it to OBD2 connector. Applicable: OP-SB87FD / OP-SB87 / OP-SB7XC /OP-SB7XL /OP-SB7GX / LE-170SA

Coaxial cable for PPS synchronization "LE-SMA-MM-2"

[ details ]

Used for time synchronization between two units

Coaxial cable for PPS synchronization "LE-SMA-LS-2"

[ details ]

Used when inputting GPS PPS signals from LE-8500X/XR or LE-8600X/XR to TRGIN of LE-8500X-RT/LE-8500XR-RT.

PPS signal I/O cable "LE-PPS-2"

[ details ]

Connected between TTL/external trigger connector of LE-8500X-RT/LE-8500XR-RT, this cable is used to input/output PPS signal and trigger IN/OUT2 signal.

BNC test clip cable "LE-BNC1040"

[ details ]

BNC <-> test clip (IC clip) cable Cable length 1.2m, Test clip length 55mm, Cable RG-58

5-wire probe cable "LE-5LP2"

A cable with test clips suitable to the external trigger of 4 inputs or 4 output connector. Length: 0.5m Applicable: LE-650H2-A / LE-650H2 / OP-SB84

External signal I/O cable "LE-4TG"

A cable with an IC clip used for inputting and outputting external trigger signals. * Equivalent to the bundled products of LE-8600X / LE-8600XR / LE-8500X / LE-8500XR / LE-8500X-SE / LE-8500XR-SE / LE-110SA etc. Applicable: LE-8600X / LE-8600XR / LE-8500X / LE-8500XR / LE-8500X-SE / LE-8500XR-SE / LE-110SA / LE-8200A / LE-8200 / LE-3200 / LE-2200

AUX Cable for DSUB 25-Pin "LE2-8C"

Cable for connecting DSUB 25pin DTE external device with AUX (RS-232C) port of measurement unit.

USB/RS-232C converter "LE-US232B"

[ details ]

Cable to convert USB/RS-232C.

Compact Thermal Printer Set "DPU-414-PA" Discontinued

	Set of a thermal printer and its option for protocol analyzers. Including the Printer (DPU-414-51B), AC adapter (PW-C0725-W2-U), 1 roll of paper, AUX cable for DP-414 (LE2-8P). The printer has a built-in battery. AC adapter and cables are not included. Provide them separately.
Prints 40 digits per line in normal mode and 80 digits in reduced mode. High-speed printing at 52.5 digits per second. Supports Centronics parallel and RS-232C ports. Incorporates eco-friendly NiMH battery. Dimensions: 160(W)x170(D)x67(H)mm Weight: Approx. 690g (including built-in NiMH battery)

AC Adapter for Japan/US "PW-C0725-W2-U"

	Input: AC100V-240V Output: DC7.0V, 2.5A (center minus)
AC Adapter for England "PW-C0725-W2-B"
AC Adapter for Europe "PW-C0725-W2-E"
AC Adapter for China "PW-C0725-W2-C"
AC Adapter for Korea "PW-C0725-W2-K"

(For other countries, please contact us.)

This is the replacement model for "PW-C0725-W1-U".

AUX cable for DPU-414 "LE2-8P"

Cable for connecting AUX (RS-232C) port of analyzer and serial port of DPU-414 (printer).

Roll Pater "TP-411L"

Thermal roll paper for DPU-414. 10 rolls per carton. Width: 112mm Length per roll: Approx. 28m

Battery pack "BP-4005-E"

4.8V, 1100mAh * Same as NiMH battery in the DPU-414.

Wide Input AC Adapter "6A-181WP09"

Replacement model of “3A-183WP09”.

Input: AC100-240V, 50/60Hz Output: DC9V, 2A Plug: Center Plus, external diameter 5.5mm, internal diameter 2.1mm Standard: PSE/UL/CUL/FCC/GS/CCC/CE Temperature: 0-40°C Applicable models: LE-8200A, LE-8200, LE-3500R, LE-2500R, LE-3500, LE-2500, LE-1500, LE-200PR, LE-150PR, LE-200PS, LE-150PS, LE-270GR, LE-270A

USB charger "LE-P1USB"

Input: AC100-240V, 50/60Hz Output: DC5V, 2A Standard: PSE/UL/CUL/FCC Temperature: 0-40°C Applicable models: LE-110SA, LE-120SA, LE-170SA

USB charger "LE-P2USB"

Input: AC100-240V, 50/60Hz Output: DC5.2V, 2.5A Standard: PSE/ETL/FCC/CCC/CE Temperature: 0-40°C Applicable models: LE-3500XR(V2), LE-2500XR(V2), LE-3500XR, LE-2500XR

Lithium-ion Battery Pack for Replacement "P-26LS1"

Rating: 3.7V, 2600mAh Appropriate model: LE-3500XR(V2), LE-2500XR(V2), LE-3500XR, LE-2500XR

NiMH Battery Pack for Replacement "P-20S"

Rating: 6V, 2100mAh Appropriate model:LE-8200A, LE-8200

NiMH Battery Pack for Replacement "P-19S"

Rating: 4.8V, 1900mAh Appropriate model:LE-3500, LE-2500, LE-1500, LE-7200, LE-3200, LE-2200, LE-1200

NiCad Battery Pack for Replacement "P-18S"
Finished product

Rating: 4.8V, 1800mAh Appropriate model:LE-7000, LE-3100, LE-3000