LE-PC800G Version up (v 1.03)

Thank you for using our products.
The program updatable to the latest version of PC link software LE-PC800G is available now. If you have been using ex-version, please update the version up.

1. What's new in version 1.03?

[Add/Improve/Change]

• Add the display of PPP translation/IrLAP translation/I²C frame/SPI frame.
• Add the configuration of Analog Wave Monitor when using the OP-SB85/85L.
• Change the name of "Wave Monotor" to "Digital Wave Monitor" in the analyzer setting.
• Compatible with OP-FW12G. Firmware of OP-FW12G has to be V2.00 or later.
• ASYNC Frame end characters can be max. 2 characters and able to set "dont care".
  (Firmware of LE-8200 has to be Ver1.05 or later.)
• Increase the numbers of characters per line when converting into the text file.
  (approx. 1M characters.)
• Increase the number of columns to set when converting into CSV file.
  (Max.255 -> Max.265535)
• Add the transmission/reception of simulation programs, save, and load functions.
• Add the seclection of whether or not transmit/receive the simulation programs.
• Add the program editor (leprogedit) from program mode in the analyzer setting.
• Shorten the error detection time such as disconnecting the USB cable.
• Able to set the max. COM port numbers by direct input.
• Add the spin button when inputting numbers.
• Change the dialog of "open file" and "save file" to the OS standard.
• Change the title and signal name of ECHO mode.
• Change the design on the menu bar in the Windows Vista.
• Change the design on the text conversion window in the Windows XP/Vista.
• Compatible with USB driver (V2.06) for Window.

[Debug]

• Correct the displayof configuration dialog in the Windows Vista.
• Correct the bug of not displaying the time stamp for 100,10, 1μs.
• Correct the miner bug of speed setting for SPI communications.
• Correct the miner bug of scrolling when HDLC translation display.
• Correct the bug that test modes of ECHO mode cannot be applied.
• Correct the bug that the order of RI/TRG control lines cannot be applied.
• Correct the miner bug about POLLING master mode.
• Correct the bug that BERT measurement data excepts REPEAT mode cannot be saved.
• Correct the bug that selection of translation format cannot be applied.
  (it is always "SD&RD")
• Correct the minier bug of key operation when text conversion.
• Correct other bugs.

Complete version history information

2. Models to need version up

• LE-PC800G v1.01

3. How to update the latest version

Preparation
Windows Installer 2.0 or newer versions have to be installed beforehand.
Please get Windows Installer 2.0 or newer versions from a support page on Microsoft web site when one of them has not been installed yet.

1. Download lepc800g_v103_update.zip (1570KB)
2. Extract the file.
3. Execute setup.exe.

The process of the model change from LE-PC800G is same as above.
But, if the trial version of LE-PC800G has been installed, please uninstall it first.

4. Contact

Email : Contact Us