Guide on Updating the Firmware of LE-8200 (version 1.09)

LINEEYE has released the latest firmware (ver1.09) of LE-8200.
The latest firmware supports sampling speed up to 100MHx in the Wave Monitor function, and improves TREND function. If you have been using the ex-version, please update to the latest version.

[ Update Information ]

Support sampling speed up to 100MHz in the Wave Monitor function. Add “10ns” in the sampling clock setting in the Wave Monitor.

→
Add precessing speed (minute, second) in the TREND function. It enables to analyze the amount differences of communications in the short period of time.

→
Support output and save the measured data in Text format. Furthermore, you can use the measured data in the calculation software etc.
(Display measured data and press [Print] -> [1] – [9] (page number))
Support Bit sequence at LSB First (SPI protocol) when using TTL/I²C/SPI expansion board (OP-SB85). It enables to test not only at MSB First but also at LSB first.

→

Able to transmit data when Clock phase is “0” without SS signal at SPI simulation.
Set back the SDO signal to be “1” when there is a rising edge of SS signal or another clock after transmission of the last bit at SPI Slave simulation.
Correct the bug of data missing after transmitting 3.7Mbps or more data at ASYNC communication.

[Complete version history]

[ How to update the latest fimware ]

Please download the latest firmware from our Website.
Refer to the"LE8FIRM.TXT" document in the utility CD and transfer the latest firmware to the analyzer.

[ Contact ]

Email: Contact Us