Guide on Updating the PC link software, LE-PC87 (version 1.03)

LINEEYE CO., LTD has released the latest PC link software for CAN/LIN communications. The latest version supports the Analog measurement mode, which is updated by the CAN/LIN expansion board, OP-SB87.

If you have been using the ex-version, please update to the latest version.

[ Update Information ]

[Improvement / Addition]

• Add the Analog Measurement mode in the Monitor function.
  Add the configuration for Analog Measurement mode, data display, and waveform display function for PC link software.
• Support baud rate of LIN up to 26Kbps.
• Add "HMS"(Hour/Minute/Second) in the time stamp resolution.
• Add "Stop" in the "BT RUN lock" in the system configuration.
• Add the timer counter display.
• Add "Full stop" and "Append" mode to save the remoter monitor data.
• Display "Tq" when setting the baud rate in CAN configuration.
• Improve the configuration of frame end time in LIN configuration.
• Add the CAN error frame search function. (only supported by PC link software)

[Improvement / Addition]

• Correct the TRG OUT setting in trigger action.

[Complete version history]

[ How to update the latest firmware ]

Please download the latest software from our Website. Unzip the folder and execute the "Setup.exe" in the folder.
Also, update the firmware of CAN/LIN expansion board (OP-SB87) to the latest version (Ver1.07).

[ Contact ]

Email: Contact Us