Guide on Updating the Firmware of CAN/LIN expansion kit "OP-SB87" (Version 1.14) for LE-8200/LE-8200A.

Thank you for using LINEEYE products.
LINEEYE has released the latest firmware of CAN/LIN communications expansion kit,"OP-SB87"
for LE-8200A/LE-8200 analyzer.
The latest firmware improves the filtering function of CAN online-monitor.
If you have been using the ex-version, please update to the latest version.

Update Information

<Improvement / Addition>

1. Improves the ID filtering of CAN
   The former version can only set the one filter which specifies ID in bit unit. (Acceptance filter)
   However, it cannot set the several IDs or remove/add the specific ID as a target.
   The latest version is able to set the Pass filter (set the specific ID) and the Cut filter (remove specific ID).
   Pass filter and Cut filter can be set up to 8 units each, and are able to monitor target node ID only.
   [ ID filter setting ]
   
   If selecting "5:All filter on", data was fillered by the Acceptance filter first, then by the Pass filter and Cut filter.
   Set the ID at the filter setting menu by selecting the function key.
   [ Acceptance filter setting ]
   
   [ Pass filter setting ]
   
   [ Cut filter setting ]
   
2. Proves the [Shift]+[A] method. (Version 1.07 or above)
   The CAN channel which is not selected as simulation channel is worked as the monitoring port and
   does not return the ACK when receiving the CAN frame.
   Pressing [Shift]+[A] makes it possible to send the ACK when receiving CAN frame.
   Pressing [Shift]+[B] or turning off the power of analyzer makes it to go back to the normal mode.
   It is useful when connecting attached cable to the CAN 1/2 channels and check the simulation function.

[Complete version history]

2. How to update the latest firmware

Please download the latest firmware from our Website.

Refer to the instruction of analyzer to transfer the firmware to the analyzer.

3. Contact

Email: Contact Us