OP-SB87 Version History

Version. 1.19 Mar 1, 2021

• Optimized the resynchronization algorithm of CAN communication

Version. 1.18 Mar 11, 2019

• The re-synchronization circuit of CAN communication has been adjusted (to aliviate the effect of the communciation speed error).

Version. 1.17 Jan 16, 2019

• Corrects the bug with that when other than 0 is set at Response of data send control in the trigger function the sub-tables of Use:Off are mistakenly transmitted.
• Added the function with which you can configure On/Off the Use at CAN sub-table summary display (Use display) by F2

Version. 1.16 Jul 5, 2017

• Supports 128Gbyte CF card.
• File number limitation for th auto save function has extended up to 2048.

Version. 1.15 Jul 22, 2015

• Corrects the bug that wrong CAN ID frames are monitored. (Version1.14only)

Version. 1.14 Mar 31, 2015

• Adds Pass filter (max.8) and Cut filter (max.8)
• Proves the [Shift]+[A] method

[ detail ]

Version. 1.13 Oct 2, 2014

• Adds the function of turning off the power automatically for Auto-run function.

[ detail ]

Version. 1.12 May. 21, 2014

• Adds the function of prohibiting simulation and BERT functions.
• Correct the bug on Version1.10 and 1.11.
  (Cannot load the file saved on the sub-folder.)
• Correct the bug on buffer protection for loading data file.
• Correct the typographic error on error massages.

Version. 1.11 Apr. 11, 2014

• Correct the bug of display massage.

Version. 1.10 Mar 18, 2014

• Add an icon for CF card on the list of files.
• Add a function of renaming on the list of files, excepting the extension part. (Shift+F3)
• Change the company name from "LINEEYE co., ltd." to "LINEEYE CO., LTD" in the opening screen.
• Change the display of accessing to the CF card on the top right of the screen.
• Correct the bug that Page size is initialized after rebooting.
• Do not allow to input "0" in the timer/counter.
• Correct the bug of Auto save function of PC link software "LE-PC87".

Version. 1.09 Jul 12, 2013

• Able to set CAN simulation data up to 272 kinds.
• Correct the bug of time stamp when the units of 1us/10us/100us reach to the maximum number.

[ detail ]

Version. 1.08 Jan 28, 2013

• Add information of analyzer in the measured data.
• Add information of analyzer and date of measuring in front of text conversion data or print-out data.
• Correct a bug of display when operation in bit-stuffing mode of SRR/IDE bit for CAN expansion ID monitor.

Version. 1.07 Mar 16, 2012

• Add Analog Measurement mode in the Monitor function.
  Measure analog voltage at appointed sampling cycle.(Min.1ms, Max.10min)(13steps)
• Support baud rate of LIN up to 26Kbps. (Before: 20Kbps)
• Add outputting wake-up signals supported by LIN Rev2.0 or above.
• Improve the configuration of "FRAME TIME" (frame end time).
• Change the initial value of INTERVAL (schedule transmission cycle) for LIN simulation to 200ms.
• Add "HMS"(Hour/Minute/Second) in the time stamp resolution
• Add "Stop" in the "BT RUN lock" in the system configuration.
• Correct a minor bug of loading configuration files of OP-SB7FX on a CF card.
• Correct a minor bug of guide message.

[ detail ]

Version. 1.06 Feb 21, 2012

• Adjust the repeated Sync circuit of CAN.

Version. 1.05 Oct 19, 2011

[Improvement / Addition]

• Improve the sampling speed of Wave Monitor function up to 100MHx. Able to set “10ns” for sampling clock at Wave Monitor configuration.
• Able to measure the form errors of CAN data frames in the CRC and ACK fields. Displays form error as “F” in the status screen. Furthermore, it will be displayed as “F” after convering into text format.
• Able to search data frame by setting ID. Moreover, “DLC=0” (no data, ID only) can be searched.

[Bug Correction]

• Correct the bug that CAN frames are recognized as ACK errors.
• CRC error was displayed as [E] in the status display. Change the character [E] to [C].
• Correct the bug that “Ch1 & Ch2” is always selected as receiving channels at the Remote search function.
• Correct the bug that all remote frames are selected as target frames at Remote search function.
• CRC upper byte and lower byte of CAN data frames were displayed in opposite after converting into text format.
• D1 to D4 logic state are set in opposite in the Wave monitor function
• Correct some minuer bugs of Configuration guide.

[ detail ]

Version. 1.04 Sep 14, 2010

• Correct the bug of not displaying the "SELF CHECK OK" in the opening screen.

[ detail ]

Version. 1.03 Sep 10, 2010

• Correct the bug of mis-counting the date of timestamp when measuring data for a couple months.
  (Timestamp will be incorrect when measuring into another month.) Timestamp will be correct when turning off the analyzer.
• Correct the bug of auto-saving. When there is not enough capacity in the CF card, there will be some corrupt auto-saving files and become error. It will not happen when specifying the size and numbers of auto-saving file within the capacity of the CF card.
• Correct the guide message in English, "1:Stop" is changed to "1:Count" at "Action" of the Data Retrieval function.

Version. 1.02 Mar 30, 2010

• Add the “Watch Data” function, which displays the latest ID frame data and updates it every second.
• Support the CAN/LIN PC Link Software “LE-PC87”.
• Adjust the “Timer/Counter” display to add the “Watch Data” display.
• If selecting a data from the CF card, display the data window. If selecting a configuration file, display the top menu.
• Correct the bug, which an error message appears in the data file window
• Correct the bug of missing word “r” for “Counter” in the “Timer/Counter” display.
• Correct the bug, which ACK/CRC errors are not displayed in the “ST” while monitoring CAN.
• Correct the bug, which “don’t care” setting is not applied to the retrieval function for LIN frame.

[ detail ]

Version. 1.02 Sep 30, 2008

• Correct the bug, which “ON” setting in the CAN ID filer become “OFF” when rebooting the analyzer.
• Correct the bug, which ID filter setting in CH-2 become the same setting in the CH-1.

Version. 1.00 Sep 1, 2009

• OP-SB87 released