Line monitor
LE-110SA
●Supports RS-232C, RS-422/RS-485 measurement
●4.3 inch color touch screen
●Preset speeds up to 460.8Kbps
●Real-time display of communication data
●Supports USB flash as strage device
●Handheld, 5 hours work by AA size Ni-MH batter
LE-110SA is a handheld line monitor specialized for ASYNC communication which is widely used in the industry. You can control the line monitor by soft screen touch as you do for smart phones. The light weight (300g including batteries) helps you for the field maintenance besides the system developments.
| Interface | RS-232C, RS-422/RS-485 | Protocol | ASYNC | Capture Memory | 16Mbyte (acout 4000Kdata), 2 part division is available | Speed (bps) | 50, 75, 150, 300, 600, 1200, 2400, 4800, 9600, 12800, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800, 921600*1, user specified speed*2 | Data length | 7bit, 8bit | Parity bit | NONE, EVEN, ODD | Stop bit?g | 1bit, 2bit | Error check | Parity, framing, brake | Data code | ASCII, JIS, EBCDIC?CHEX | Idle time | Resolution 100ms, 10ms, 1ms, OFF(no display) can be selected. Max 999.9 seconds | Time stamp | Date time stamp: Unit selectable among "Year/Mon/Day Hr:Min," "Mon/Day Hr:Min:Sec," "Day Hr:Min:Sec.10ms," or OFF (with no record) | Line state | Records and displays the wave form and logical status of external trigger input and control line along with the transmission/reception data. | Data search | Communication error, Max 8 characters data line (Don't care and bit maskare available)), idle time more than the specified duration, time stamp within the specified time range, cueing and counting of trigger matching data |
|---|---|
| Trigger function | Up to four pairs of trigger conditions and actions can be specified. |
| Condition | Communication error, communication data string up to 8 characters (don't care and bit mask are available), idle time more than the specified duration, Timer/counter match, logical status of the control line and external trigger. |
| Action | Stops measurement/test (number of offsets until a stop can be set), validates trigger conditions, controls timer, controls counter, activates buzzer, saves monitor data into a USB flash, sends the specified character string, sends pulse output to external trigger terminal OT2 |
| Monitor conditions auto setting | Automatically configures the setting (max 460.8Kbps)*3 |
| Auto run/stop function*1 | It can automatically start and finish measurement at the specified time at the selected repeating cycle (monthly, daily, hourly). |
| Power ON auto run function*1 | It can automatically start measurement when power is turned ON. |
| Auto save function*1 | Automatically saves the monitored data in the capture memory and saves as communications log file in a USB flash memory. Restart mode and Append mode (which are ring save operation) and Max mode (in which the measurement stops at the specified capacity.) can be selected. |
| File size | BUF (capture memory size) , 1MB , 2MB , 4MB , 8MB |
| MAX. files | 256 |
| Simulation function*4 | Test data transmission, ON/OFF of RTS/DTR |
| Transmission data | Max 16 (up to 16K in total) transmission data an be registered. 14 pre-set data and break output are available. |
| Driver IC control | Auto control is available |
| File management function | Measured data and measurement condition can be saved into a USB flash and can be read from the USB flash. |
| Power save function | Automatic light reduction, auto power off |
| Remote control | PC link software (light version) is offered for free. |
| Line status LED | Logical status of SD(TXD), RD(RXD), RTS, CTS are displayed. |
| Display | 4.3 inch TFT color display (480x272dot) |
| Touch panel | Capacitance touch panel |
| USB2.0 device port | Micro B connector, high speed transmission supported. Used for PC connection and firmware update. |
| USB2.0 host port | Standard A connector, high speed transmission supported. Used for USB flash connection*5 | Power | USB bus power 5V/500mA Two AA Ni-MH batteries or two AA alkaline batteries (LR6) |
Drive time*6 | AA Ni-MH batteries: about 5 hours AA alkaline batteries: about 2 hours |
Temperature & humid | 0 to 40 degrees celcius (-10 to 50 degrees celcius for storage), under 85%RH | Size & weight | 158mm x 100mm x 31mm, 300g(including batteries) | Accesories | DB9 branch monitor cable (LE-009M2), external signal I/O cable (LE-4TG), micro USB cable, two AA Ni-MH batteries, utility CD, carrying bag, quick start guide, warranty card |
*1: Available by the firmware ver.1.05 or later
*2: User specified speed can have a margin of error.
*3: It cannot work properly when there are little communication data or when the data do not have 101,010 bit pattern.
*4: Only DTE mode is available
*5: Not all the USB falshes are supported.
*6: Based on our testing by common usage.