PRODUCT
TTL monitor prove pod
(for LE-200PR/LE-150PR)
(for LE-200PR/LE-150PR)
OP-5ML
Specification
| Applicable Analyzers | LE-200PR / LE-150PR / LE-200PS / LE-150PS / LE-150P / LE-150L | ||
|---|---|---|---|
| Input Signal | SD、RD、RTS、CTS、DSR、DTR、DCD、CI | ||
| Input Level Threshold Value | Signal Level | High | Low |
| 5.0V | Min. 3.5V | Max. 1.5V | |
| 3.3V | Min. 2.2V | Max. 0.9V | |
| 1.8V | Min. 1.3V | Max. 0.6V | |
| Signal level is adjustable by DIP switch. | |||
| Input Hysteresis Voltage | Min. 0.3V to Max. 1.2V | ||
| Input Impedance | 100KΩ（0V≦,Vin≦,+5V） 10KΩ（Vin<0V, +5V<Vin） |
||
| Input Capacity | Less than 10pF | ||
| Maximum of Input Voltage | ±25V | ||
| Output Pull-up Voltage for Testing | Possible to output test voltage corresponding to DIP switches of No.2-No.4 through resistance of 1.5KΩ. (Possible to use for pull-up of target signal of testing at open collector output.) | ||
| Dip Switch | Signal polarity and input level are selectable. | ||
| No. | Switch Meaning | ||
| 1 | Signal Polarity | ||
| 2 | 5.0V signal level | ||
| 3 | 3.3V signal level | ||
| 4 | 1.8V signal level | ||
| Power | Supplied from the analyzer | ||
| Weight&Size of Pod | 78(W) x 92(D) x22(H), 240g | ||
| Prove Unit | Length of Probe lead: 170mm Test Clip: 10 Croc clip: 1 |
||
| Length of Probe Cable | 300mm | ||