PRODUCT
LAN ⇔ RS-232C(2ports)
Interface Converter
Interface Converter
SI-60X
●Convert 2 ports of RS-232C serial devices to LAN.
●Support serial data max. at 921.6Kbps.
●Connects 10Base-T/100Base-TX by auto-detection.
●Supports multi protocols such as TCP/IP, UDP/IP, ARP, etc.
●Equip with an initial switch for initializing the configuration.
●Equip with a COM-port emulation software.
●Able to use the general RS-232C cable widely used for PC.
●Solid, card-case sized, and metal enclosure.
●Optional DIN rail mounting plate and L bracket are available as mounting method.
●Low power consumption. RoHS compatible product.
●Can use in the workplace environments between -10 to 50 degree Celsius.
●2 kinds of power input (DC jack and header connector)
●Equip with a sample software for installing several units.
SI-60X: Japanese model (100V Input AC adapter)
SI-60X-E: World wide model (Wide Input AC adapter )
Specification
| Conversion | LAN ⇔ RS-232C x 2ports |
|---|---|
| LAN Interface | RJ-45 connector 10BASE-T/100BASE-TX, Ethernet IEEE802.3 |
| LAN Protocol*1 | ARP, UDP/IP, TCP/IP, ICMP, TFTP, Telnet, DHCP, BOOTP, HTTP, AutoIP |
| Serial Interface | RS-232C x 2ports, Dsub9 Pin Male (#4-40UNC inch screw) |
| Serial signal*2 | SD, RD, RTS, CTS, DSR, DTR DTE fixed |
| Synchronous Method | Asynchronous |
| Baud Rate (bps) | 300/600/1200/2400/4800/9600/19200/38400/57600/115200/230400/ 460800/921600 |
| Data Frame Structure | Data (7 or 8) + Parity (Even, Odd, None) + Stop (1 or 2) |
| Flow Control | Xon/off, RTS/CTS*3 |
| Management Initial setting |
DeviceInstaller, Web manager, Telnet login, Serial port log-in*4 |
| Sample software | Transmit and receive program (with source code) for Windows® Vista/7/8 |
| Switch | Initial switch (Initializing the IP address and communication condition) |
| LED display | Power on/off, LAN connection, RS-232C line status |
| Power Supply | DC-IN: DC5 to 30V / 250 to 45mA Supply power from attached AC adapter, DC jack (DC-IN1) or Connector (DC-IN2) |
| Power Consumption | 2.8VA (when using AC adapter (AC100V) |
| Temperature | Operating: -10 to 50 degree Celsius. Storage: -20 to 80 degree Celsius. |
| Humidity | 10 to 95% RH (no condensation) |
| External Dimension (mm) | 78(W) x 85(D) x 24(H) |
| Weight (g) | Approx. 220 |
| Mounting method | Use M3 screw hole in the bottom face. Install to a DIN rail (using optional DIN mounting plate) Use optional L bracket. |
| Accessories | AC adapter, Utility CD-ROM, Instruction manual, Warranty |
*1 Support serial data communication of TCP/IP or UDP/IP.
*2 Same in both two ports.
*3 Cannot control/monitor RTS/CTS through LAN.
*4 Able to use only one RS-232C port.