Multi Protocol Analyzer
LE-3500XR(V2)
●4.3 inch color touch screen
●RS-232C, RS-422/485, TTL (UART/I2C/SPI) as standard
●Can be expanded to a highly accurate 8-input analog data logger
●Supports HDLC/SDLC, Modbus, I2C, and SPI measurement tests as standard
●Supports CAN, CAN FD, LIN, CXPI etc. by optional expansion set
●Supports V.35, X.20/21, and RS-449 by optional expansion board and cable
●Secure long-term recording on USB flash or SD card by AUTO SAVE
●High precision time stamp of hour, minute, second, 10msec
●Logic analyzer analysis and signal voltage measurement
●Supports PC connection and remote control by Wi-Fi
LE-3500XR(V2): Japanese model (with Japanese manual)
LE-3500XR(V2)-E: Abroad model (with English manual)
LE-3500XR(V2) inherits all the functions of the conventional model LE-3500XR, such as the analysis test function of RS-232C, RS-422/485, TTL communication data, and expansion of communication measurement targets by adding options, while also being equipped with new functions that can be used as an analog measurement logger. In addition, the USB 2.0 device port has been changed from the conventional micro-B connector to the Type-C connector, which has been widely used in recent years.
During development testing of communication systems, it can be used as a high-performance protocol analyzer, and during normal development when voltage and temperature measurement and recording are required, it can be used as a high-precision data logger.
* To use it as an analog measurement logger, the analog pod (optional, sold separately) is required.
| Item | Name | Remarks |
|---|---|---|
| Expansion kit for CAN FD/CAN/CXPI | OP-SB7XC | |
| Expansion kit for CAN FD/CAN/LIN | OP-SB7XL | |
| Analog pod | OP-8AH | For high-speed, maximum ±60V voltage measurement * cannot be used with the conventional model without (V2). |
| Analog pod | OP-8AT | For insulation and voltage/temperature measurement * cannot be used with the conventional model without (V2). |
| Expansion kit for current loop comm. | OP-SB1C | |
| Expansion kit for TTL/I2C/SPI | OP-SB5GL | For TTL(USART) |
| Expansion kit for RS-530 | OP-SB10N | For RS-530/V.24 |
| Firmware for high-speed communication | OP-FW10XR | For high-speed CC-Link/HDLC/SPI, max.10Mbps |
| 32GB SDHC card | SD-32GX | |
| DSUB25pin monitor cable | LE-25M1 | Note: same as the attached one |
| DSUB9pin monitor cable | LE-259M1 | For RS-232C of DSUB9 pin |
| DSUB9pin branch cable | LE-009M2 | Same as the attached one |
| X.21 monitor cable | LE-25Y15 | For DSUB15 pin X.20/21. Y-type branch |
| RS-449 monitor cable | LE-25Y37 | For DSUB37 pin RS-449. Y-type branch |
| V.35 monitor cable | LE-25M34 | For M-type 34pin V.35 |
| RS-530 cable | LE-25S530 | For RS-530 of DSUB25 pin |
| 5 wires TTL prove cable | LE-5LS | Same as the attached one |
| 10-pin external I/O cable | LE-10ES1 | Cable with 1 pin connector each for TTL measurement port |
| PC link software | LE-PC300R | Note: This software does not support OP-SB7GX. |
| PC link software | LE-PC7XCL | For OP-SB7XC/OP-SB7XL |
| USB charger | LE-P2USB | 1.8m with A-B connector |
| Carrying bag | LEB-01 | Note: same as the attached one |
| Battery pack | P-26LS1 | For replacement. Same as the attached one |
| 3.81mm pitch terminal block (5 terminals) | LA-5ETB45 | For replacement. Same as the one attached to the RS-422/RS-485 measurement port. |
| Small mobile printer | SM4-31W | The Lightweight, robust, waterproof and dustproof (equivalent to IP54) battery-powered printer. You can print communication data, statistical analysis information, measurement conditions, etc. measured with a compatible LineEye communication analyzer on site without using a PC. |