HOME > PRODUCT > INTERFACE CONVERTER > SI-60

PRODUCT

LAN ⇔ RS-232C
Interface Converter

SI-60

●Connects 10Base-T/100Base-TX by auto-detection.
●Supports multi protocols such as TCP/IP, UDP/IP, ARP, etc.
●Displays the RS-232C lines by LEDs, which are useful to check communications at the first stage.
●Can use in the workplace environments between -10 to 50 degree Celsius.
●Solid, card-case sized, and metal enclosure.
●Supports installation of 35mm DIN rail.
●Environment-friendly design. Use lead-free solder. Non-use of chromium screw etc.

SI-60: Japanese model (100V Input AC adapter)
SI-60-E: World wide model (Wide Input AC adapter )

Option

Item	Appearance	Name	Remarks
DIN Plate		SI-DIN70	Uses for installing 35mm DIN rail.
DIN Plate		SI-DIN30S	Uses for installing vertically to 35mm DIN rail.
Magnet		SI-MG70	Two magnets to attach the SI/LANIO-series on the wall. Screw two magnets on the bottom of device.
Wall bracket		SI-WM1	Metal fitting to attach the device on the wall. Screw the meal fitting board on the bottom of device.
AUX cable		LE2-8C	To connect SI-60 (DTE) with the AUX port of LINEEYE analzyers
RS-232C cable		SI-RS259-3	DSUB9pin Female - DSUB25pin Male (Straight connection 3.0m). Uses for connecting SI-60 (DCE setting) to the serial port on a DOS/V machine.
RS-232Cケーブル（給電対応）		SI-RS259-2P2	DSUB25ピンオス（ミリネジM2.6） - DSUB9ピンオス（ミリネジM2.6） RS-232Cストレート結線仕様長さ2ｍ給電用分岐ケーブル付きケーブル長などをカスタム指定することも可能です。 [詳細はこちら ]
AC adapter		VFN-650B	Input: AC100V, 50/60Hz Output: DC6V, 500mA Plug: Center minus, 5.5mm (external), 2.1mm (internal) Standard: PSE Noise resistance * Same as attached one.
AC adapter for SI-series		GF12-US0618	Input: AC100-240V, 50/60Hz Output: DC6V, 1.8A Plug: Center minus, 5.5mm (external), 2.1mm (internal) Standard: PSE/UL/CUL/FCC/CE *Small, low cost AC adapter
Wide Input AC adapter		6A-181WP09	Input: AC100-240V, 50/60Hz Output: DC9V, 2A Plug: Center plus, 5.5mm (external), 2.1mm (internal) Standard: PSE/UL/CUL/FCC/GS/CE/CCC * Same as AC adapter packaged with world wide model
Power plug cable		SIH-2PG	DC plug 2.1mm (5.5mm outside)-Y terminal (1.8m) For the external DC power supply connection to the DC-IN terminal. The cable clamp attachment is included.