PRODUCT
LAN ⇔ RS-232C
Interface Converter
Interface Converter
SI-60
●Connects 10Base-T/100Base-TX by auto-detection.
●Supports multi protocols such as TCP/IP, UDP/IP, ARP, etc.
●Displays the RS-232C lines by LEDs, which are useful to check communications at the first stage.
●Can use in the workplace environments between -10 to 50 degree Celsius.
●Solid, card-case sized, and metal enclosure.
●Supports installation of 35mm DIN rail.
●Environment-friendly design. Use lead-free solder. Non-use of chromium screw etc.
SI-60: Japanese model (100V Input AC adapter)
SI-60-E: World wide model (Wide Input AC adapter )
Specification
| Conversion | LAN <->RS-232C |
|---|---|
| LAN Interface | RJ-45 connector 10BASE-T/100BASE-TX, Ethernet IEEE802.3 |
| LAN Protocol | ARP, UDP/IP, TCP/IP, ICMP, SNMP, Telnet, DHCP, BOOTP, HTTP, AutoIP |
| Serial Interface | RS-232C, Dsub25 Pin (Female), DTE/DCE Switchable |
| Serial signal | SD, RD, RTS, CTS, DSR/DTR*1 |
| Synchronous Method | Asynchronous |
| Baud Rate (bps) | 300/600/1200/2400/4800/9600/19200/38400/57600/115200/230400 |
| Data Frame Structure | Data (7 or 8) + Parity (Even, Odd, None) + Stop (1 or 2) |
| Flow Control | Xon/off, RTS/CTS |
| Management Initial setting | Web server, Telnet login, Serial login, SNMP |
| Sample software | Transmit and receive program (with source code) for Windows® |
| Firmware | Able to write on the FTP or internal flash memory via serial communication. |
| LED display | LAN connection, RS-232C signal status |
| Power Supply *2 | Dsub connector: DC 5 to 12V AC adapter: AC100V+/- 15%, 50/60Hz |
| Power Consumption*3 | 4.2VA (when using AC adapter (AC100V) |
| Temperature | Operating: -10 to 50 degree Celsius*4 Storage: -20 to 80 degree Celsius |
| Humidity | 10 to 95% RH (no condensation) |
| External Dimension (mm) | 65(W) x 95(D) x 24(H) |
| Weight (g) | Approx. 200 |
| Accessories | AC adapter (VEN-650B), Utility CD-ROM, Instruction manual, Warranty |
*1 DSR and DTR are connected inside the unit, which logic state can be checked with CP1 of XPort.
*2 Supplied either from.
*3 When using the attached AC adapter (AC100V).
*4 Operation temperature will be -10 to 40 degree Celsius when DC power voltage from Dsub connecter is more than 10V.